Pro-Flo 系列
北京pk10彩票 The Pro-Flo™ patented air distribution system incorporates three moving parts: The unbalanced air valve spool, the pilot spool, and the main shaft/diaphragm assembly. The air valve spool location directs pressurized air to one air chamber while exhausting the other. The pressurized air chamber causes the main shaft/diaphragm assembly to move outward discharging liquid on that side and pulling liquid in on the other side. When the shaft reaches the end of its stroke, the opposite inner piston actuates the pilot spool. The pilot spool location either pressurizes or exhausts the large end of the unbalanced air valve spool. When the large end is pressurized, the piston is forced up so that the air supply is routed through the air valve spool to the right side of the pump. When the large end is exhausted, the piston is forced down so that the air supply is routed through the air valve spool to the left side of the pump. Note: This valve design incorporates an unbalanced spool with the smaller end of the spool pressurized continuously. |
![]() |
地址:上海市纪念路8号2幢101室
电话:021-31271585(总机)
021-31271553(市场)
QQ:2818120949
传真:021-31271556
邮箱:sales@cal-mech.com
北京pk10彩票
邮编:200434
关于我们 产品中心 资讯动态 技术支持 联系我们 |
![]() |
版权所有2015 上海加洲机械有限公司 |